which CRP is doing now. What does that mean for our customers? Not having to worry about verifying the information declared by CRP, because the Certification will guarantee it. Here’s the exact definition.

Document issued by the manufacturer in which he declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results.
The test unit and the tests to be carried out are defined by the product specification, the official regulation and corresponding rules and/or the order.
The document is validated by the manufacturer's authorized inspection representative, independent of the manufacturing department.
It shall be permissible for the manufacturer to transfer on to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary or incoming products he uses, provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required.
The CoC attached with each batch of the Windform product, shows the exact data of the 3.1 type Control Certificate and certifies the repeatability of the productive batches, therefore the constancy of the technical characteristics of the powder material. These CoC are now also available online:

Each batch is consequently characterized by tests on the sintered bars following CRP’s indications, which are done by external and certified laboratories, which guarantees the consistency of the technical characteristics of the sintered materials (if sintered in the right way). The results of the tests done on the sintered materials, traceable for each batch of production, are viewable under specific request.

The quality certainty is a profit, always and for everybody.